Lumatek *Version 1* LED T-Junction Daisy Chain Cable (LUM0003)

Firstly, congratulations on still rocking the version 1 (or lucking out and grabbing them on eBay for a pittance) they are indeed an absolute work horse and you have saved so much money through their efficiency! 

This cable is ONLY if you have the old original V1 Lumatek 600w LED. 

This T-junction and control link cable component is used to link Lumatek Zeus LED fixtures together in series to be externally controlled with the Lumatek Control Panel Plus.

This T-junction and control link cable component is used to link Lumatek Zeus LED fixtures together in series to be externally controlled with the Lumatek Control Panel Plus.

The T-junction comprises three LLT M12 connectors, two male and one female.

The male connector on the main stem connects to the dimming wire from the LED driver/fixture with the control link cable from the Control Panel Plus connecting to the male connector on the T arm.

The control link cable male connector is connected to the female connector on the other T-arm and the control link cable female connector is connected to the next LED fixture T-junction and so on.

Package contains:

T-Junction (3x LLT M12 connector – 2x female, 1x male)

Control link cable with H05RN-F 2×0.5mm with LLT M12 male connector & LLT M12 female connector